TPMS tire pressure monitoring system Lucifer LED mirrors compatible with BMWby Magazi
- Two-tone color LED lights, various combinations of driving and indicator lights set up.
- Waterproof and dustproof LED modules.
- Stylish designs for your custom applications.
- Wider vision with convex lens and E-mark approved.
- Easy installation.
- Sealed LED module with IP67 dust & waterproof Compliant.
- Check the tire pressure in an easy way: rear view mirrors + TPMS display 2 in 1!
- Showing tire pressure, battery voltage wirelessly, through hidden display inside mirror lens.
- Internal type of sensor, more accurate than external cap type sensor.
- Low or high tire pressure alarm with visual red LED.
- Bluetooth 4.0 wireless data transmission.
- Battery life depends on usage. In average it’s more than 3 years.
- Allows easy access for tire maintenance with L-type valve, makes checking and inflating your tires easy.
- IP68 waterproof - The hidden display module passed the IP68 test, means that will give reasonably water-resistant in daily use.
- The tire pressure data can also be viewed from APP, if pairing with Bluetooth smart phone.
Mirror Housing: ABS plastic
Mirror Stem: Aluminum
Air Valve: Aluminum
Storage temperature: -40°C ~ 125°C
Operating temperature: -20°C ~ 105°C
Operating frequency: 2.4GHz
Detect pressure range: 0 ~ 92 psi (637kpa)
Diamond / Other
Chrome convex lens
n.w.: 992 g./2.18 lbs. (pair),
g.w.: 1272 g./2.798 lbs. (total package, packing inclusive)
Mirror plate: Matte black
LED: White: 2 PCS (12V / 0.9W), Amber: 7 PCS (12V / 0.9W)
620mm / 24inch
A pair of mirrors ( Left hand / Right hand ),
TPMS sensor x 2, L-type air valve kit x 2,
10mm standard thread bolt x 2 PCS,
10mm reverse thread bolt x 1 PC,
8mm standard thread bolt x 2 PCS,
8mm reverse thread bolt x 1 PC,
10MM 1.25 pitch to 10MM 1.5 pitch adapter x 2 PCS,
bolt cap x 2, cable tie x 2
Compatible for most BMW motorcycles*
*For F650, F650CS, etc... the correct bolt size is M8 1.25pitch, please buy from "8mm for scooter" instead.
*For K1200GT, K1200RS, R1100GS, R1100R, R1100RS, R1150GS R1150R, R1150RS, R1200C, etc... use an 8mm stem going through the switch box. Please buy from the fitment for "most Harley-Davidson" using the same way application.
(Please make sure your rims' width is more than 27mm and depth is more than 28mm)
Connect to the Turn Signal
♦ There is no need to replace the relay when using this product with exisiting blinkers.
♦ Relay is needed when using this product as the only turn signal.
♦ Minor modification might be required depending on motorcycles.
2. Read the instruction and video before installing the TPMS sensor.
3. If you replace your stock turn signals with these LED mirrors, a load equalizer or a LED-compatible flasher may(will) be required to have the LEDs flash at the normal rate.
*Please allow measuring deviation due to manual measurement.
There are yet no reviews for this product.
Please log in to write a review. Log in