Compatible for most BMW motorcycles*
*For F650, F650CS, etc... the correct bolt size is M8 1.25pitch, please check "8mm for scooter" instead.
*For R18, K1200GT, K1200RS, R1100GS, R1100R, R1100RS, R1150GS, R1150R, R1150RS, R1200C, etc... use an 8mm stem going through the switch box. Please check the fitment for "most Harley-Davidson" using the same way application.
Oi Flash Controller is designed to replace a 3-pin flasher relay ONLY (not for a 4 or 5 pin relay, it will destroy the device).
Connect to the Turn Signal
♦ There is no need to replace the relay when using this product with exisiting blinkers.
♦ Relay is needed when using this product as the only turn signal.
♦ Minor modification might be required depending on motorcycles.
Check the wiring of the vehicle on the manufacturer service manual, refer to the wiring table below, and connect the turn signal wiring with the attached electro tap.
Also, please wire the position line (white) of this product to the accessory power supply of each vehicle.
A table of this product and main manufacturer blinker wiring colors:
||Running Light (-)
||Right Turn Signal (+)
||Left Turn Signal (+)|
||black / white
||black / yellow
Each manufacturer wiring color in the table is for reference only, it depends on the vehicle year and specifications, please be sure to confirm with the service manual issued by the manufacturer and connect it.