Horus black heavy weight cafe racer bar end mirrors for 1 and 1-1/4 Inch hollow end handlebars

0 Rating
$135.00
In Stock
SKU: 100118119301003
How to pick the correct bar end mirrors mounting hardware.

Please identify and choose the suitable mounting hardware for your bike. Contact us if you are not certain.

Fitment Sold in Units
Visualize it right away
Printable 1:1 actual size. Print and compare before purchase.
The thinnest motorcycle mirrors! The Minimal motorcycle mirrors series - unbelievably thin aluminum mirror plate. Every part of the plate can't be thinner and still has enough space to put a convex glass on!
It will ONLY work on 1" and 1-1/4" hollow ended handlebars with internal diameters from 17mm to 24mm.
Because of the small dimensions of the mirror glass, this product must only be fitted for racing or show purposes.

How to install this bar end mirrors on your motorcycle

  • Features
    1. The thinnest motorcycle mirrors.
    2. Unbelievably thin aluminum mirror plate. Every part of the plate can't be thinner and still has enough space to put a convex glass on!
    3. Unique patented adjust-and-stop Teflon(PTFE) bushing joint. On the road, you can easily adjust the mirror plate with your bare hand and don't have to worry about it goes messing around.
    4. Eliminating the vibrations of the handlebar -- the stability of the handlebar is essential to balance the oscillations which often occur when riding the motorcycle.
    5. Minimal design.
    6. The special design of the ball knuckle - The most impossible angle adjusted as your desire. It's a good solution to fold-in mirrors when you are splitting traffic or parking the motorcycle in a narrow space.
    7. Glass mirror - better scratch resistance than non glass one.
    8. It fits perfectly with naked motorcycles. The eye-catching design and high-quality aluminum give your bike an individual character.
    9. It can be mounted in 2 ways, standard upright or flip it down.
  • Material
    Mirror Housing: Aluminum
    Mirror Stem: Aluminum
  • Color
    Black
  • Adjustment
    Highly adjustable
  • Glass
    Chrome convex lens
  • Weight
    n.w.: 618 g./ 1.36 lbs. (pair),
    g.w.: 753 g./ 1.66 lbs. (total package, packing inclusive)
  • Package
    A pair of mirrors (left hand / right hand),
    17, 20mm expansion components-hollow side x 2,
    17, 20mm expansion components-threaded side x 2,
    M6 bolt x 2
  • Compatibility
    It ONLY works on outer diameter 1" and 1-1/4" hollow-ended handlebars with internal diameter (ID):
    The 17mm expansion components set is for ID of 17.5mm to 20.4mm,
    and the 20mm expansion components set is for ID of 20.5mm to 24.9mm.
    If the ID of your bar does not fall in the range above, please contact us before purchase.
    *For 7/8" hollow ended handlebars or threaded inside the bar end, please find the suitable set in our store, or leave the model and year of the motorcycle as notes before finishing your order.
1. Can not be installed on vehicles having electronic throttle control (ETC).
2. Some bikes with solid bar need to drill and tap. Modification might be needed.
3. For 7/8" hollow ended handlebars or threaded inside the bar end, please find the suitable set in our store, or leave the model and year of the motorcycle as notes before finishing your order.
4. Because of the small dimensions of the mirror glass, this product must only be fitted for racing or show purposes.
5. Might need to apply some washers as spacer to avoid contact with grips. (spacers are not included.)
KiWAV, kiwavmotor, motorcycle, TheMinimal HorusHB, ext1inch

*Please allow measuring deviation due to manual measurement.

Measurement of KiWAV motorcycle bar end mirrors Horus for 1 inch & 1-1/4 inch hollow end handlebars

There are yet no reviews for this product.

Please log in to write a review. Log in