LED mirrors Lucifer with sequential effect black compatible with Harley Davidsonby Magazi
Sealed LED module with IP67 dust & waterproof compliant.→ What does IP67 waterproof rating mean?
IP6x is the highest dust resistance rating, so this product is fully protected against dust.
IPx7, the second-highest water resistance rating, means this product can withstand immersion in water up to one meter (3.3 feet) for 30 minutes, tested in laboratory conditions.
|6||Dust tight||No ingress of dust; complete protection against contact (dust tight). A vacuum must be applied. Test duration of up to 8 hours based on air flow.|
|Code||Protection against||Test duration||Description|
|7||Immersion, up to 1 m depth||30 mins||Protected from immersion in water with a depth of up to 1 meter (or 3.3 feet) for up to 30 mins|
- Two-tone color LED lights, various combinations of driving and indicator lights set up.
- Turn signal light up in sequence, from the inside outwards.
- Sealed LED module with IP67 dust & waterproof compliant.
- Stylish designs for your custom applications.
- Wider vision with convex lens and E-mark approved.
- Easy installation.
Mirror Housing: ABS plastic
Mirror Stem: Aluminum
Chrome convex lens
n.w.: 690 g./ 1.52 lbs. (pair),
g.w.: 1215 g./ 2.68 lbs. (total package, packing inclusive)
Mirror plate: Matte black
LED: White: 2 PCS (12V / 0.9W), Amber: 7 PCS (12V / 0.9W)
620mm / 24inch
A pair of mirrors (left hand / right hand),
10mm standard thread bolt x 2 PCS,
10mm reverse thread bolt x 1 PC,
8mm standard thread bolt x 2 PCS,
8mm reverse thread bolt x 1 PC,
10mm to 5/16"-24 adapter x 2 PCS,
bolt cap x 2, cable tie x 2
Compatible for most Harley-Davidson motorcycles* & BMW R18 series models
*For XG Street models, please check the fitment "Street 750/500" instead.
*For '21 later Revolution® Max engine-equipped models, Nightster, Pan America, etc..., the correct bolt size is M10 1.25 pitch, please use the M10 bolts to install (included in the package) or check the fitment "10mm for metric bikes"
Connect to the Turn Signal
♦ There is no need to replace the relay when using this product with exisiting blinkers.
♦ Relay is needed when using this product as the only turn signal.
♦ Minor modification might be required depending on motorcycles.
Check the wiring of the vehicle on the manufacturer service manual, and connect the turn signal wiring with the attached electro tap.
Also, please wire the position line (white) of this product to the accessory power supply of each vehicle.
- In order to use this product safely please understand and work on the followings:
- This is only suitable for skilled users, others please find the nearest dealers.
- For removal / installation of genuine parts and tightening of bolts / nuts, please be sure to perform based on the manufacturer's issued service manual.
- Please stop using it immediately if any faults happen.
- We are making every effort to manufacture and making sure its quality, but please do not install if there is any incompleteness in the item if any.
- Warranty is voided if any of the above are not followed.
*Please allow measuring deviation due to manual measurement.
There are yet no reviews for this product.
Please log in to write a review. Log in