BSD system with Buck mirrors compatible with most Harley Davidson

0 Rating

$689.00

Out of Stock

SKU: 100162019285503
EAN: 0680577070837

Visualize it right away

Printable 1:1 actual size. Print and compare before purchase.

Back to: For Harley

Blind spot detection has been available on cars for a number of years. Now KiWAV presents the future of motorcycle safety product -- BSD system for motorcycle. Compatible with most Harley Davidson.

KiWAV motorcycle BSD system built in rear view mirrors Buck black for most Harley Davidson

Features
1. A revolutionary safety product to monitor the blind spots with advanced radar sensors while riding your motorcycle. Modern cars now have this technology and it only makes sense that your motorcycle does too.
2. A built-in LED indicator on both side of rear-view mirrors. It signals you when there is traffic coming into your blind spots. This will increase rider awareness to surrounding traffic conditions.
3. With the Magazi BSD system, you can ride with more confidence and safety. The warning zone of the system covers left and right adjacent lanes with up to 30 ft range.
4. BSD is automatically activated when the motorcycle is started.
5. Easy installation - most motorcycles can be equipped in under an hour, two radar sensors mounted to the license plate frame. Power for the system is drawn from the bike's battery. Then, indicators that light up are built-in the mirror.
6. Swivel adjustable ball joint, find the best rear view angle and ready to go.
7. Stylish designs for your custom applications.
8. Wider vision with convex lens.

Material
Mirror Housing: ABS plastic
Mirror Stem: Aluminum
BSD radar body: Hi-impact plastic housing
BSD radar bracket: Aluminum
Color
Black
BSD SPEC
Storage temperature: -40°C ~ +90°C
Operating temperature: -40°C ~ +80°C
Input Voltage Range: 9V – 16V, 12V (Typical)
Current Consumption: <1050mA ± @12V
Dust & waterproof compliant: IP67
Specifications: ISO 16750
Radiation Regulations: FCC/NCC

Glass
Chrome convex lens
Weight
n.w.: 1447 g./ 3.18 lbs. (pair),
g.w.: 1745 g./ 3.84 lbs. (total package, packing inclusive)
Package
A pair of mirrors (Left hand / Right hand),
BSD control unit x1, radar x a pair,
10mm standard thread bolt x2, 10mm reverse thread bolt x1,
8mm standard thread bolt x2, 8mm reverse thread bolt x1, bolt cap x2,
10mm to 5/16"-24 adapter x 2 PCS,
bracket for radar (L type) x 2, bracket for radar (straight type) x 2,
wire harness set x 4, zip ties, quick connector x4

Compatibility
5/16": Compatible for most Harley Davidson, except '21 later Revolution® Max engine-equipped models, Nightster, Pan America, etc... and XG street models.
Compatible for BMW R18 series models.
*Please must check the NOTES below.

Harley Davidson

BMW

Our BSD system is NOT RECOMMENDED if your motorcycle has:
1. The exhaust placed too close to the license plate, the heat from exhaust gases will damage the radar sensor.
2. The license plate is not located directly behind the motorcycle.
3. The distance from the ground to the license plate is lower than 50 cm (19.68 inch) or higher than 90 cm (35.43 inch).
4. There is no space for the radar sensor on the both sides of the license plate. (you can download the template to measure and find out.)

KiWAV, kiwavmotor, motorcycle, BuckBSD BuckHarley, naked, 5/16inch

*Please allow measuring deviation due to manual measurement.