LED round tail light with Oi flash controller

0 Rating
$82.10
Out of Stock
SKU: 991970423320000
Visualize it right away
Printable 1:1 actual size. Print and compare before purchase.

Oi flash controller changes the original lighting into a lively art performance by combining fade-in / fade-out type and flashing type light with different tempo combinations.
Modulation brake light effects are great for grabbing the attention of somebody behind you who might be distracted. Package includes an Oi flash controller and a LED taillight.

Oi 16 flash modes demo video
  • Feature
    1. Get more attention and visibility from the vehicle behind you in traffic.
    2. 16 flashing modes that no one else has.
    3. Much brighter and cooler than a normal taillight.
    4. 12 LEDs for stop/ tail lamp.
    5. IP66 dust & waterproof compliant*.
    6. Indicator function. (Need to install two lamps)

Sealed LED module with IP66 dust & waterproof compliant.

→ What does IP66 waterproof rating mean?

IP6x is the highest dust resistance rating, so this product is fully protected against dust.
IPx6, the third-highest water resistance rating, means this product can withstand powerful water jets up to 3 mins from a distance of 3 meters, tested in laboratory conditions.

Code Effective against Description
6 Dust tight No ingress of dust; complete protection against contact (dust tight). A vacuum must be applied. Test duration of up to 8 hours based on air flow.

Code Protection against Test duration Description
6 Powerful water jets 3 mins from a distance of 3 meters Protection from water projected in powerful jets from a nozzle with a 12.5mm diameter opening in any direction
  • Feature
    1. Get more attention and visibility from the vehicle behind you in traffic.
    2. 16 flashing modes that no one else has.
    3. Much brighter and cooler than a normal taillight.
    4. 12 LEDs for stop/ tail lamp.
    5. IP66 dust & waterproof compliant*.
    6. Indicator function. (Need to install two lamps)
  • Oi Flash Controller SPEC
    ♦ 16 different modes that can be applied to your stop light, turn signal light, hazard light, and decoration light.
    ♦ Operate in the voltage range from 6.5V to 16V. (Suitable for 12V vehicle power system)
    ♦ Ambient temperature must not below -20° (-4°F) and not exceed +85° (185°F).
    ♦ Works both for​ halogen ​& LED bulbs.
    ♦ Super-duper easy set up for LED lights. NO LOAD RESISTOR IS NEEDED.
    ♦ Maximum current rating up to 8A. (Suitable for up to 4 light bulbs with 21W)

    ATTENTION!Oi Flash Controller is designed to replace a 3-pin flasher relay ONLY (not for a 4 or 5 pin relay, it will destroy the device).

  • Material
    Lens: Acrylic
    Reflector, Frame: ABS
  • Net Weight
    199g
  • Package
    LED tail light x 1, Oi flash controller x 1
  • Color
    Tail/ stop: red LED
    Indicator: amber LED
  • Shape
    Round
  • Light Source
    Tail/ stop: 12pcs red LED, 12V 0.1W/ 12V 1.7W
    Indicator: 6pcs amber LED, 12V 2.0W
    The turn signal lights are 2.0W instead of 1.2W in mass production.
    (Note: The imprint on unit wasn't revised specifically.)
  • Wire Length
    Tail light: 145mm/ 5.7 inch
    Oi flash controller: 155mm/ 6.1 inch
  • Type
    Tail lamp, (optional)turn signal
  • Certification
    EMI class 3 and IP66 dust & waterproof Compliant*
    ECE, SAE approved.
*Protected from dust / Protected against powerful jetting of water.
1. These are NOT plug & play parts, motorcycle electrical knowledge is required.
2. Newer Harley-Davidsons run the "indicator flash rate" through the OEM TSM/TSSM modules. You can not use Oi flash controller if the OEM TSM/TSSM modules include the circuit of your motorcycle.

*Please allow measuring deviation due to manual measurement.

Measurement of LED round tail light with Oi flash controller

There are yet no reviews for this product.

Please log in to write a review. Log in