Motorcycle LED round tail light/brake light universal fit

In Stock
SKU: 100750523320000
Visualize it right away
Printable 1:1 actual size. Print and compare before purchase.

Sealed LED module with IP66 dust & waterproof compliant.

→ What does IP66 waterproof rating mean?

IP6x is the highest dust resistance rating, so this product is fully protected against dust.
IPx6, the third-highest water resistance rating, means this product can withstand powerful water jets up to 3 mins from a distance of 3 meters, tested in laboratory conditions.

Code Effective against Description
6 Dust tight No ingress of dust; complete protection against contact (dust tight). A vacuum must be applied. Test duration of up to 8 hours based on air flow.

Code Protection against Test duration Description
6 Powerful water jets 3 mins from a distance of 3 meters Protection from water projected in powerful jets from a nozzle with a 12.5mm diameter opening in any direction
  • Feature
    1. LED stop/ tail lamp.
    2. Much brighter and cooler than normal taillight.
    3. Indicator function.( Need to install two lamps)
  • Material
    Lens: Acrylic
    Reflector: ABS
    Frame: ABS
  • Net Weight
    135g /0.3lbs
  • Package
    1 PC
  • Light Source
    Tail/ stop: 12pcs red LED, 12V 0.1W/ 12V 1.7W
    Indicator: 6pcs amber LED, 12V 2.0W
    The turn signal lights are 2.0W instead of 1.2W in mass production.
    (Note: The imprint on unit wasn't revised specifically.)
  • Type
    Tail lamp, (optional)turn signal
  • Certification
    EMI class 3 and IP66 dust & waterproof Compliant*
    ECE, SAE approved.
  • Fitment
    Universal brake light/ indicator for custom project motorcycle, ATV, UTV, etc.

    Direct replacement rear indicator for:
    (Please note that the connector may vary, minor modification might be needed for it.)
    Kymco Maxer EQ40DA
    One Rehab President/ Phantom
    Van Os Galaxy II/ Galaxy Plus 3/ Galaxy Plus 4/ Excel Galaxy II Deluxe/ Excel Galaxy Citiflyer
    Travelux Discovery Sport 6-8mph Mobility Scooter
*Protected from dust / Protected against powerful jetting of water.
1. Lamp brackets are not included.
2. Modification maybe needed during installation.
3.Mating connectors and the mounting bracket are sold separately.

*Please allow measuring deviation due to manual measurement.


Wednesday, 14 February 2018

I'm using these on an off road vehicle. I don't have them installed yet, but hooked them up to a battery to test them. Very pleased with the brightness of them and the size is perfect. Not to big and not to small. I also like the fact that all of your lights are in . --by Joseph

Marie C.

Please log in to write a review. Log in