TPMS tire pressure monitoring system with Buck fairing mount mirrors for sportsbikes
- Features
- Check the tire pressure in an easy way: rear view mirrors + TPMS display 2 in 1!
- Showing tire pressure, battery voltage wirelessly, through hidden display inside mirror lens.
- Internal type of sensor, more accurate than external cap type sensor.
- Low or high tire pressure alarm with visual red LED.
- Bluetooth 4.0 wireless data transmission.
- Battery life depends on usage. In average it’s more than 3 years.
- Allows easy access for tire maintenance with L-type valve, makes checking and inflating your tires easy.
- IP68 waterproof - The hidden display module passed the IP68 test, means that will give reasonably water-resistant in daily use.
- The pressure and the temperature of tires can also be viewed from the app if pairing with Bluetooth smartphone.
- Mirror: Wider vision with convex lens and E-mark approved.
- Mirror: Swivel adjustable ball joint, find the best rear view angle and ready to go.
- Material
Mirror Housing: ABS plastic
Mirror Stem: Aluminum
Air Valve: Aluminum - TPMS SPEC
Storage temperature: -40°C ~ 125°C
Operating temperature: -20°C ~ 105°C
Operating frequency: 2.4GHz
Detect pressure range: 0 ~ 92 psi (637kpa) - Shape
Diamond / Other - Glass
Chrome convex lens - Weight
n.w.: 810 g./1.78 lbs. (pair),
g.w.: 1170 g./2.57 lbs. (total package, packing inclusive)
- Color
Black - Adjustment
High adjustable (three adjusting joints) - Wire Length
1110mm / 43.5inch - Package
A pair of mirror ( Left hand / Right hand ),
adapter with toothed adjustment joint x 2 PCS,
rubber mounting gasket x 2 PCS,
M6 bolt 25 mm long x 4 PCS,
M6 bolt 40 mm long x 4 PCS,
M6 nut x 4 PCS, big washer x 4 PCS, small washer x 4 PCS
- Compatibility
Suitable for hole spacings C2C on the fairing from 26 mm to 55 mm with M6 bolts.
See the Fitment List Installation
1. Read the instruction and video before installing the TPMS sensor.
1. Please refer to your service manual to remove the original mirror.
2. Read the instruction and video before installing the TPMS sensor.
2. Temporarily fix the mirror to the bolt fixing position of the vehicle, using the base rubber, bolts (those with matching length or genuine one), washers and nuts. (See the figure below)
3. Once temporarily fixed to the left and right, please adjust the whole position using hexagon wrench at the two bolts at the bottom of the mirror.
4. Tightening each part after the position is finally fixed.
2. Read the instruction and video before installing the TPMS sensor.
*Please allow measuring deviation due to manual measurement.
There are yet no reviews for this product.
Please log in to write a review. Log in