LED mirrors Lucifer with sequential effect black compatible with BMW
$168.00
In Stock
SKU: 100100219003303
Magazi matt black with two-tone LED neat stem rear view motorcycle mirrors is E-mark approved. Sealed LED module with IP67 dust & waterproof Compliant. The mirror housing is made out of ABS plastic and the stem is made of aluminum 1 joint(s) make it fairly adjustable, diamond shape chrome convex lens gives a wide and clear view. 
Sealed LED module with IP67 dust & waterproof compliant.
→ What does IP67 waterproof rating mean? 
IP6x is the highest dust resistance rating, so this product is fully protected against dust.
IPx7, the second-highest water resistance rating, means this product can withstand immersion in water up to one meter (3.3 feet) for 30 minutes, tested in laboratory conditions.
| Code | Effective against | Description |
|---|---|---|
| 6 | Dust tight | No ingress of dust; complete protection against contact (dust tight). A vacuum must be applied. Test duration of up to 8 hours based on air flow. |
| Code | Protection against | Test duration | Description |
|---|---|---|---|
| 7 | Immersion, up to 1 m depth | 30 mins | Protected from immersion in water with a depth of up to 1 meter (or 3.3 feet) for up to 30 mins |
- Features
- Two-tone color LED lights, various combinations of driving and indicator lights set up.
- Turn signal light up in sequence, from the inside outwards.
- Sealed LED module with IP67 dust & waterproof compliant.
- Stylish designs for your custom applications.
- Wider vision with convex lens and E-mark approved.
- Easy installation.
- Material
Mirror Housing: ABS plastic
Mirror Stem: Aluminum
- Shape
Diamond - Glass
Chrome convex lens - Weight
n.w.: 690 g./ 1.52 lbs. (pair),
g.w.: 1215 g./ 2.68 lbs. (total package, packing inclusive)
- Color
Mirror plate: Matte black
LED: White: 2 PCS (12V / 0.9W), Amber: 7 PCS (12V / 0.9W) - Adjustment
Fairly adjustable - Wire Length
620mm / 24inch - Package
A pair of mirrors (Left hand / Right hand),
10mm standard thread bolt x 2 PCS,
10mm reverse thread bolt x 1 PC,
8mm standard thread bolt x 2 PCS,
8mm reverse thread bolt x 1 PC,
10mm 1.25 pitch to 10mm 1.5 pitch adapter x 2 PCS,
bolt cap x 2, cable tie x 2
- Compatibility
Compatible for most BMW motorcycles*
*For F650, F650CS, etc... the correct bolt size is M8 1.25pitch, please check "8mm for scooter" instead.
*For R18, K1200GT, K1200RS, R1100GS, R1100R, R1100RS, R1150GS, R1150R, R1150RS, R1200C, etc... use an 8mm stem going through the switch box. Please check the fitment for "most Harley-Davidson" using the same way application. Connect to the Turn Signal
♦ There is no need to replace the relay when using this product with exisiting blinkers.
♦ Relay is needed when using this product as the only turn signal.
♦ Minor modification might be required depending on motorcycles.
- In order to use this product safely please understand and work on the followings:
- This is only suitable for skilled users, others please find the nearest dealers.
- For removal / installation of genuine parts and tightening of bolts / nuts, please be sure to perform based on the manufacturer's issued service manual.
- Please stop using it immediately if any faults happen.
- We are making every effort to manufacture and making sure its quality, but please do not install if there is any incompleteness in the item if any.
- Warranty is voided if any of the above are not followed.
*Please allow measuring deviation due to manual measurement.
There are yet no reviews for this product.
Please log in to write a review. Log in
Related Products
