Eclipse short stem mirrors

Q: What style of mirrors are these?

These are classic old-school round motorcycle mirrors with a short stem design, suitable for custom, retro, café racer, cruiser, and modern classic motorcycles.

Q: What size are the mirrors?

Each mirror features a 4-inch round mirror plate , balancing a compact look with practical visibility.

Q: How is the rearward visibility with the short stem?

Because the stem is short , rearward visibility depends on the motorcycle, handlebar width, and rider position. Visibility varies by setup and may not always extend past the rider’s arms .

Q: Are these mirrors E-mark approved?

Yes. The mirrors use E-mark approved convex glass , suitable for road use where E-mark certification is required.

Q: What motorcycles are these mirrors compatible with?

These mirrors are compatible with almost all motorcycles on the market , including e-bikes , as long as the correct mounting bolt is used. Multiple adapters and bolts are included to cover most applications.

Q: What mounting hardware is included?

These mirrors are designed with a 10 mm standard mounting bolt as the base configuration . To support a wide range of motorcycles, a selection of commonly used adapters is included to accommodate different thread directions and sizes. Not every possible bolt for every motorcycle is included. The included hardware typically supports the following configurations: 10 mm standard thread (direct mount) 10 mm reverse thread adapter (commonly required for Yamaha) 10 mm × 1.5 pitch adapter (used on many BMW models) 10 mm to 8 mm adapters for models using 8 mm mirror mounts Commonly used Harley mirror adapters Adapters designed to fit Harley-Davidson mirror mounts (Street models not included) Riders should select the appropriate adapter from the included set based on their motorcycle’s mirror thread size, pitch, and thread direction.

Q: Are these mirrors compatible with Harley-Davidson motorcycles?

Yes. These mirrors are compatible with many Harley-Davidson models, excluding Street models. . Compatibility is achieved by using the appropriate Harley-specific adapters included in the package. Please verify your motorcycle’s mirror mounting type before installation to ensure proper fitment.

Q: Can these mirrors be mounted in an under-bar position?

Yes. They can be installed in standard or under-bar positions , depending on handlebar design and rider preference. Rearward visibility should be checked after installation.

Q: What materials are used in these mirrors?

Mirror housing: Reinforced ABS plastic Mirror stem: CNC-milled aluminum Finish: Black Glass: Convex chrome lens

0 Rating

$51.80

In Stock

SKU: PARENT-01-1904-EclipseSH

Eclipse Shorty motorcycle mirrors, black, available in multiple fitments, sold as a pair.

To view more product information (more photos, specification, and dimension), please choose a fitment above.

KiWAV black rear view motorcycle mirror Eclipse Shorty is a universal fit for most motorcycles ( Honda, Kawasaki, Suzuki, Victory, Triumph, Aprilia, Buell) motorcycles.

Q1: What style of mirrors are these?

A: These are classic old-school round motorcycle mirrors with a short stem design, suitable for custom, retro, café racer, cruiser, and modern classic motorcycles.

Q2: What size are the mirrors?

A: Each mirror features a 4-inch round mirror plate, balancing a compact look with practical visibility.

Q3: How is the rearward visibility with the short stem?

A: Because the stem is short, rearward visibility depends on the motorcycle, handlebar width, and rider position.
Visibility varies by setup and may not always extend past the rider’s arms.

Q4: Are these mirrors E-mark approved?

A: Yes. The mirrors use E-mark approved convex glass, suitable for road use where E-mark certification is required.

Q5: What motorcycles are these mirrors compatible with?

A: These mirrors are compatible with almost all motorcycles on the market, including e-bikes, as long as the correct mounting bolt is used.
Multiple adapters and bolts are included to cover most applications.

Q6: What mounting hardware is included?

A: These mirrors are designed with a 10 mm standard mounting bolt as the base configuration.
To support a wide range of motorcycles, a selection of commonly used adapters is included to accommodate different thread directions and sizes. Not every possible bolt for every motorcycle is included.

The included hardware typically supports the following configurations:

Standard metric motorcycles

10 mm standard thread (direct mount)
10 mm reverse thread adapter (commonly required for Yamaha)

BMW applications

10 mm × 1.5 pitch adapter (used on many BMW models)

Scooters and smaller motorcycles

10 mm to 8 mm adapters for models using 8 mm mirror mounts

Harley-Davidson applications

Commonly used Harley mirror adapters
Adapters designed to fit Harley-Davidson mirror mounts
(Street models not included)

Riders should select the appropriate adapter from the included set based on their motorcycle’s mirror thread size, pitch, and thread direction.

Q7: Are these mirrors compatible with Harley-Davidson motorcycles?

A: Yes. These mirrors are compatible with many Harley-Davidson models, excluding Street models..
Compatibility is achieved by using the appropriate Harley-specific adapters included in the package. Please verify your motorcycle’s mirror mounting type before installation to ensure proper fitment.

Q8: Can these mirrors be mounted in an under-bar position?

A: Yes. They can be installed in standard or under-bar positions, depending on handlebar design and rider preference. Rearward visibility should be checked after installation.

Q9: Are these mirrors easy to install?

A: Yes. Installation is straightforward with basic tools, and most riders complete installation in about 10 minutes.

Q10: What materials are used in these mirrors?

Mirror housing: Reinforced ABS plastic
Mirror stem: CNC-milled aluminum
Finish: Black
Glass: Convex chrome lens

Q11: Are the mirrors adjustable?

A: Yes. The mirrors are fairly adjustable, allowing angle and position to be fine-tuned for different riding setups.

Q12: Are these mirrors lightweight?

A: Yes. Net weight is approximately 340 g (0.75 lbs) per pair, helping maintain handlebar balance.

Q13: What is included in the package?

1 pair of mirrors (left & right)
Full adapter and bolt set as listed
Installation hardware

Q14: Is there any installation caution?

A: Do not over-tighten mounting hardware. Tighten securely but moderately to avoid thread damage.

Q15: Are these a good replacement for stock mirrors?

A: Many riders choose these as a style-focused upgrade with solid build quality and flexible mounting options. Actual visibility depends on motorcycle geometry and setup.

Q16: Which specific motorcycles have customers successfully installed these mirrors on?

A: Based on verified customer feedback, these mirrors have been successfully installed on a variety of motorcycles and vehicles, including:

Harley-Davidson Street Bob (FXBBS)
Harley-Davidson Road Glide Limited
Harley-Davidson models with Revolution Max engines (such as Nightster and Pan America)
Kawasaki Vulcan S
BMW R18 series
Indian Scout / Scout Bobber
Triumph Bonneville series
E-bikes with compatible mirror mounting threads

Fitment depends on selecting the correct mounting bolts from the included hardware set. These examples reflect real customer installations and do not limit compatibility to only these models.

Real-world setups from our global riders out on the road.

(These photos show real customer installations. Vehicles shown may have been modified, so please select the appropriate fitment option for your vehicle.)