- Oi flash is a new generation vehicle light controller.
- 16 flashing modes that no one else has!
- It changes the original lighting into a lively art performance by combining fade-in / fade-out type and flashing type light with different tempo combinations.
- Can be applied to your stop light, turn signal light, hazard light, and decoration light.
- Operate in the voltage range from 6.5V to 16V. (Suitable for 12V vehicle power system)
- Ambient temperature must not below -20°C (-4°F) and not exceed +85°C (185°F).
- Works both for halogen & LED bulbs.
- Super-duper easy set up for LED lights. NO LOAD RESISTOR IS NEEDED.
- Maximum current rating up to 8A. (Suitable for up to 4 light bulbs with 21W)
Oi flash controller x 1
155mm/ 6.1 inch
This product is designed to replace a 3-pin flasher relay ONLY (not for a 4 or 5 pin relay, it will destroy the device).
1. These are NOT plug & play parts, motorcycle electrical knowledge is required.
2. Although this device has been designed to significantly increase your lighting visibility, flash/strobe patterns may not be street legal in your area.
3. Newer Harley-Davidsons run the "indicator flash rate" through the OEM TSM/TSSM modules. You can not use Oi flash controller if the OEM TSM/TSSM modules include the circuit of your motorcycle.