LED mirrors Lucifer with sequential effect carbon compatible with Ducati Panigale

$199.50
In Stock
SKU: 100120419000008
Fitment Color Sold in Units
Visualize it right away
Printable 1:1 actual size. Print and compare before purchase.
Magazi matt black with two-tone LED neat stem rear view motorcycle mirrors is E-mark approved. Sealed LED module with IP67 dust & waterproof Compliant. The mirror housing is made out of ABS plastic and the stem is made of aluminum 1 joint(s) make it fairly adjustable, diamond shape chrome convex lens gives a wide and clear view.


Lucifer LED Motorcycle mirror turn signal, driving light, in the daylight, at night, in total darkness

Sealed LED module with IP67 dust & waterproof compliant.

→ What does IP67 waterproof rating mean?

IP67: Ingress protection, Solid particle protection, Liquid ingress protection

IP6x is the highest dust resistance rating, so this product is fully protected against dust.
IPx7, the second-highest water resistance rating, means this product can withstand immersion in water up to one meter (3.3 feet) for 30 minutes, tested in laboratory conditions.

Code Effective against Description
6 Dust tight No ingress of dust; complete protection against contact (dust tight). A vacuum must be applied. Test duration of up to 8 hours based on air flow.

Code Protection against Test duration Description
7 Immersion, up to 1 m depth 30 mins Protected from immersion in water with a depth of up to 1 meter (or 3.3 feet) for up to 30 mins
Lucifer LED Motorcycle mirror turn signal, driving light, in the daylight, at night, in total darkness
  • Features
    1. Two-tone color LED lights. White light as the running light, yellow light as the turn signal.
    2. Turn signal light up in sequence, from the inside outwards.
    3. Sealed LED module with IP67 dust & waterproof compliant.
    4. Stylish designs for your custom applications.
    5. Wider vision with convex lens and E-mark approved.
    6. Easy installation.
  • Material
    Mirror Housing: ABS plastic
    Mirror Stem: Aluminum
  • Shape
    Diamond / Other
  • Glass
    Chrome Convex Lens
  • Weight
    n.w.: 700 g./ 1.54 lbs. (pair),
    g.w.: 1100 g/ 2.42 lbs. (total package, packing inclusive)
  • Color
    Mirror plate: carbon fiber pattern
    LED: White: 2 PCS (12V / 0.9W), Amber: 7 PCS (12V / 0.9W)
  • Adjustment
    Highly adjustable (three adjusting joints)
  • Wire Length
    620mm / 24inch
  • Package
    A pair of mirror ( Left hand / Right hand ),
    adapter with toothed adjustment joint x 2 PCS,
    rubber mounting gasket x 2 PCS,
    M6 bolt 25 mm long x 4 PCS, M6 bolt 40 mm long x 4 PCS,
    M6 nut x 4 PCS, big washer x 4 PCS, small washer x 4 PCS,
    M5 bolt 25 mm long x 4 PCS, M5 bolt 40 mm long x 4 PCS,
    M5 nut x 4 PCS, big washer x 4 PCS, small washer x 4 PCS
  • Compatibility
    Suitable for Ducati Panigale whose mounting surface is flat.
    (For example, the mounting surface of Model 899 or 1199 is not flat. It requires some modification for installation. Please check the measurement for more details.)
  • Installation

    1. Please refer to your service manual to remove the original mirror.
    2. Temporarily fix the mirror to the bolt fixing position of the vehicle, using the base rubber, bolts (those with matching length or genuine one), washers and nuts. (See the figure below)
    3. Once temporarily fixed to the left and right, please adjust the whole position using hexagon wrench at the two bolts at the bottom of the mirror.
    4. Tightening each part after the position is finally fixed.

    Installation Guide of KiWAV Lucifer LED mirrors for sportsbike
  • Connect to the Turn Signal

    ♦ There is no need to replace the relay when using this product with exisiting blinkers.
    ♦ Relay is needed when using this product as the only turn signal.
    ♦ Minor modification might be required depending on motorcycles.

    Check the wiring of the vehicle on the manufacturer service manual, refer to the wiring table below, and connect the turn signal wiring with the attached electro tap.
    Also, please wire the position line (white) of this product to the accessory power supply of each vehicle.

    A table of this product and main manufacturer blinker wiring colors:
    Running Light (-) Right Turn Signal (+) Left Turn Signal (+)
    Lucifer black yellow yellow
    Honda green light blue orange
    Yamaha black deep green brown
    Suzuki black / white light green black
    Kawasaki black / yellow grey green

    Each manufacturer wiring color in the table is for reference only, it depends on the vehicle year and specifications, please be sure to confirm with the service manual issued by the manufacturer and connect it.

    In order to use this product safely please understand and work on the followings:
  1. This is only suitable for skilled users, others please find the nearest dealers.
  2. For removal / installation of genuine parts and tightening of bolts / nuts, please be sure to perform based on the manufacturer's issued service manual.
  3. Please stop using it immediately if any faults happen.
  4. We are making every effort to manufacture and making sure its quality, but please do not install if there is any incompleteness in the item if any.
  5. Warranty is voided if any of the above are not followed.

*Please allow measuring deviation due to manual measurement.

Measurement of KiWAV Lucifer LED motorcycle mirrors for sportsbike

Reviews

Tuesday, 21 April 2020

So far I was able to wire these mirrors into the oem connector and they don't need any flash controller to work properly. They look stunning and if I could post some pics I would but non the less fits perfectly, looks clean and I have no issues or fast blinking with these light. The sequential effect is quick but its way cooler then just flashing. Worth the extra price. Carbon fiber doesn't look real up close but it still looks right on the bike none the less. I'm in love

Anthony Hott

Please log in to write a review. Log in