バーエンドミラー マンバ 丸型 ツヤ消し仕上げカーボンファイバー ヘビーウェイト 一部のハーレー用

0 Rating
$193.00
You save:
$31.00
在庫あり
商品番号: 100107419428841
How to pick the correct bar end mirrors mounting hardware.

Please identify and choose the suitable mounting hardware for your bike. Contact us if you are not certain.

適用範囲 単位
Visualize it right away
Printable 1:1 actual size. Print and compare before purchase.
特色:
1.ファンシーな装飾でバイクの印象を変える ― 高品質のアルミと最新技術のカーボンファイバー(炭素繊維)で製作されるバイクミラー
2.普通のカーボンファイバー(炭素繊維)ではない:
・一般のカーボンファイバーはエポキシ樹脂を使用ですが、こちらはポリカーボネート使用のCFRTPで製作される
・優秀な耐衝撃性 ― 2層の3K平織のカーボンファイバー(最上層と最低層)を使い、真ん中の層はポリカーボネートとガラス繊維強化樹脂であり
・環境にやさしい ― 再生利用と再利用できる
・紫外線抵抗性ありの塗り
3.ヘビーウェイトのエンド部でハンドルの振動を減られる
4.信じられない薄さ ― 一番薄いところはおよそ4.8mmのみで、バイクにキレイな外見
5.コンベックスレンズで、より広い視野ができるの上、ヨーロッパ基準のE-mark認証も取っておる

 
材料:
ハウジング ― カーボンファイバー(炭素繊維)とアルミニュム
柄 ― アルミニュム
ガラス ― クロムコンベクスレンズ
色:ツヤ消し仕上げカーボンとマットブラック
調整:一つの調整ジョイント
重量:n.w.: 749 g./ 1.65 lbs. (一対), g.w.: 854 g./ 1.88 lbs. (包装含まれ)
パッケージ:
ミラー 一対(右側と左側)
14、17、20mm取付部品(中空側) 2個
14、17、20mm取付部品(ネジ穴側) 2個
M6ボルト 2本
スペーサー 2個
ワシャー 2個

 
取付可能車種:
外径7/8インチ、1インチや1-1/4インチの中空式ハンドル付きモデル
14mm取付部品は内径14.5mm-15.7mmm対応
17mm取付部品は内径17.5mm-20.4mmm対応
20mm取付部品は内径20.5mm-24.9mmm対応

 
純正やアクセサリハンドルバー付きのハーレーモデルに取付可能
2015以降の XG
2002-2017の VRSC
1996以降の XL と XR
1996-2017の Dyna ( FXDLSを除く)
1996-2015の Softail ( FLSTNSE、FXSBSE と FLSTSEを除く)
1996-2007の Touring
注意事項:
1.バーエンドミラーを装着できるように、グリップは切られる、或は両側のエンド部が開けられるのを確認してください。
例:純正ゴム製グリップ、ハーレーのアクセサリダイアモンドブラックハンドグリップ(品番:56100199 (1")、56100202 (7/8"))等。 2.電子制御式スロットル(ETC)付きモデルには取り付けできません。

 
註:
1.電子制御式スロットル(ETC)付きモデルには取り付けできません。
2.バーエンドミラーを装着為に、グリップは切られる、或は両側のエンド部が開けられるのを確認してください。 例:純正ゴム製グリップ、ハーレーのアクセサリダイアモンドブラックハンドグリップ(品番:56100199 (1")、56100202 (7/8"))等。 3.詰まっているハンドルは孔をあけ必要があります。改造必要の可能性があります。
4.グリップの接触を避けるために、座金を用意して、スペーサーとして使うのは勧めます。(スペーサーは含まれていません。)
  • Features
    1. A fancy detail that makes your motorcycle different—combining high quality aluminum and latest technology carbon fiber composite.
    2. Not the usual carbon fiber:
      1. Unlike conventional CFRPs that uses epoxy resin, Mamba is special blend Carbon Fiber Reinforced Thermoplastic (CFRTP) that uses Polycarbonate (a thermoplastic) instead.
      2. Excellent impact toughness-- 2 layers of (top and bottom) 3K plain weave carbon fiber, with a mid-layer reinforced glass fiber impregnated through-and-through with Polycarbonate.
      3. Environmental friendly, can be recycled and reused.
      4. UV resistant coating.
    3. Eliminating the vibrations of the handlebar -- the stability of the handlebar is essential to balance the oscillations which often occur when riding the motorcycle.
    4. Unbelievable thin. Gives a tidy, neat, and clean look. The thinnest point is around 4.8mm depending on models.
    5. E-mark approved with a wider clear rear-view convex chrome lens.
  • Material
    Mirror Housing: Real carbon fiber and machined aluminum
    Mirror Stem: Aluminum
  • Glass
    Chrome convex lens
  • Weight
    n.w.: 749 g./ 1.65 lbs. (pair),
    g.w.: 854 g./ 1.88 lbs. (total package, packing inclusive)
  • Color
    Matte carbon and black painted aluminum
  • Adjustment
    Fairly adjustable (one adjusting joint)
  • Package
    A pair of mirrors (left hand / right hand),
    14, 17, 20mm expansion components-hollow side x 2,
    14, 17, 20mm expansion components-threaded side x 2,
    M6 bolt x 2, spacer x 2, washer x 2
  • Compatibility
    It will work on 7/8" to 1-1/4" outer diameter hollow ended handlebars with internal diameter from 14mm to 24mm (9/16" to 15/16").
    Compatible for stock or accessory handlebars on
    '15-later XG
    '02-'17 VRSC
    '96-later XL & XR
    '96-'17 Dyna (except FXDLS)
    '96-'15 Softail (except FLSTNSE, FXSBSE and FLSTSE)
    '96-'07 Touring
    * Please make sure your grips are allowed to be cut or opened to install our mirrors. e,g., stock rubber grips, H-D accessory Diamond-Black Hand Grip P/N 56100199 (1") or 56100202 (7/8"), etc.
    * Can not be installed on any motorcycles having electronic throttle control (ETC).
1. Can not be installed on vehicles having electronic throttle control (ETC).
2. Please make sure your grips are allowed to be cut or opened to install our mirrors. e,g., stock rubber grips, H-D accessory Diamond-Black Hand Grip P/N 56100199 (1") or 56100202 (7/8"), etc.
3. Some bikes with solid bar need to drill and tap. Modification might be needed.
KiWAV, kiwavMirror, kiwavmotor, motorcycle, MambaRoundHB, barend, bar end, mat black

*Please allow ±3% measuring deviation due to manual measurement.

Measurement of KiWAV bar end mirrors Mamba Round carbon compatible for Harley Sportster Dyna Softail XG street motorcycles

商品レビューはまだありません

レビューを書くためにはログインしてください。 ログイン