カウルミラー マンバ 光沢仕上げカーボンファイバー フェアリング取付 汎用
1.ファンシーな装飾でバイクの印象を変える ― 高品質のアルミと最新技術のカーボンファイバーで製作されるバイクミラー
2.普通のカーボンファイバー(炭素繊維)ではない:
・一般のカーボンファイバー(炭素繊維)はエポキシ樹脂を使用ですが、こちらはポリカーボネート使用のCFRTPで製作される
・優秀な耐衝撃性 ― 2層の3K平織のカーボンファイバー(最上層と最低層)を使い、真ん中の層はポリカーボネートとガラス繊維強化樹脂であり
・環境にやさしい ― 再生利用と再利用できる
・紫外線抵抗性ありの塗り
3.軽くけど強い ― 完全アルミ製のミラーより40%ほど軽い
4.信じられない薄さ ― 一番薄いところはおよそ4.8mmのみで、バイクにキレイな外見
5.コンベックスレンズで、より広い視野ができるの上、ヨーロッパ基準のE-mark認証も取っておる
材料:
ハウジング ― カーボンファイバー(炭素繊維)とアルミニュム
柄 ― アルミニュム
ガラス:クロムコンベクスレンズ
色:光沢ありカーボンとマットブラック
調整:三つの調整ジョイント
重量:n.w.: 765g./ 1.69 lbs. (ミラー 一対)、g.w.: 855g./ 1.88 lbs. (包装も含まれ)
パッケージ:
ミラー一対(右側と左側)
アダプター 2個
ゴム製取付ガスケット 2個
M6ボルト(長さ25mmの4本、長さ40mmの4本)
M6ナット4個
ワッシャー(大きめ4個、小さめ4個)
取り付け可能車種:
カウルミラー仕様になっている車両専用
取付け条件:
1.純正ミラーがM6ボルト2本で固定されているバイク。
2.取付ボルトの固定ピッチ範囲が26mm-55mmのバイク。
3.取付け面が平面のバイク。
註:汎用製品なので、部分改造や、加工は必要の可能性があります。
- Features
- A fancy detail that makes your motorcycle different—combining high quality aluminum and latest technology carbon fiber composite.
- Not the usual carbon fiber:
- Unlike conventional CFRPs that uses epoxy resin, Mamba is special blend Carbon Fiber Reinforced Thermoplastic (CFRTP) that uses Polycarbonate (a thermoplastic) instead.
- Excellent impact toughness-- 2 layers of (top and bottom) 3K plain weave carbon fiber, with a mid-layer reinforced glass fiber impregnated through-and-through with Polycarbonate.
- Environmental friendly, can be recycled and reused.
- UV resistant coating.
- Extra strength with reduced weight (about 40% less weight than other full aluminum made mirrors).
- Unbelievable thin. Gives a tidy, neat, and clean look. The thinnest point is around 4.8mm depending on models.
- E-mark approved with a wider clear rear-view convex chrome lens.
- Material
Mirror Housing: Real carbon fiber and machined aluminum
Mirror Stem: Aluminum - Color
Glossy carbon and matte black - Adjustment
Highly adjustable (3 adjusting joints)
- Glass
Chrome convex lens - Weight
n.w.: 765 g./ 1.69 lbs. (pair),
g.w.: 855 g./ 1.88 lbs. (total package, packing inclusive) - Package
A pair of mirrors ( left hand / right hand ),
M6 bolt 25mm long x 4 PCS,
M6 bolt 40mm long x 4 PCS,
adapter x 2 PCS, rubber mounting gasket x 2 PCS,
M6 nut x 4 PCS, big washer x 4 PCS, small washer x 4 PCS
- Compatibility
Suitable for hole spacings C2C on the fairing from 26 mm to 55 mm.
See the Compatibility List
*Please allow ±3% measuring deviation due to manual measurement.
商品レビューはまだありません
レビューを書くためにはログインしてください。 ログイン