二色LED付きカウルミラー　ルシファー　黒　Oiフラッシュコントロール付き　フェアリング取付　汎用

0 Rating

$224.84

$202.36

You save:

$22.48

在庫なし

商品番号: 100182719000003

Fitment Guide for Sportsbike

Visualize it right away

Printable 1:1 actual size. Print and compare before purchase.

戻る: ウインカー付き

特色
1.OiフラッシュコントロールとルシファーLEDバイクミラーはカスタムバイクプロジェクトを新たなレベルに連れて行く
2.内蔵二色のLEDライト付き、好きに組み合わせて、ウインカーとドライヴィングとして使えまる
3.IP67認証、防塵と防水の密封LEDモジュール
4.カスタムバイクに似合うスタイリッシュな設計
5.凸面鏡で、より広い視野ができる
6.新車輌ミラー保安基準適合品、その上、ヨーロッパ基準のEマーク認証のミラーとLEDライト
7.視認性かなり増強：後ろの車の注意を引く
8.全16種、特別なフラッシュモード
9.適用電圧範囲：6.5V t～ 16V（12Vの車両電源システムに適用）
10.作業環境温度：-20°C (-4°F) ～ +85°C (185°F)
11.定格電流最大値は8Aまで、およそ四つの21Wのライトバルブ
12.LEDライトに非常に簡単の設定、余分なリレーはいりません。

取付可能車種：Honda CB1300SB、CBR250RR、CBR125R、Yamaha YZF-R25、Kawasaki Ninja、Aprilia RSV4 Ducati 1198 、959 1299 Panigale、 MV Agusta F4 1000 等
（ご購入前に取付けの説明をご確認ください）

取付け説明：カウルミラー仕様になっている車両専用
取付け条件：
1.純正ミラーが6ミリボルト2本で固定されているバイク。
2.取付ボルトの固定ピッチ範囲が20ｍｍ-61ｍｍのバイク。
3.取付け面が平面のバイク。

ハウジングの材料：ABSプラスチック
柄の材料：アルミニュム
鏡板の色：黒
LED：
白：二個 (12V / 0.9W)；琥珀色：七個 (12V / 0.9W)
ガラス：クロム凸面鏡
ミラーの電線長さ：620mm /24inch
Oiフラッシュコントロールの電線長さ：155mm/ 6.1 inch
調整範囲：かなり調整できます
重量：n.w.: 820 g./ 1.8 lbs. (一対)、 g.w.: 1220 g/ 2.68 lbs.（全体な重量、包装を含まれ）
パッケージ：
一対(右側と左側)
Oiライトフラッシュコントロール　x2
調整用のジョイント付きアダプター　x2
ゴムの取付ガスケット　x2
25ｍｍ長さのM6ボルト　x4
40ｍｍ長さのM6ボルト　x4
M6ナット　x4
大きいワッシャー　x4
小さいワッシャー　x4
ケーブルタイ　x2

註：
1.プラグアンドプレイのパーツではありません。ある程度の車両電子知識は必要です。
2.純正部品の取外し/取付け、ボルト/ナットの締め付けについては各メーカーのサービルマニュアルに基づいて、確実に作業をしてください。
3.製造及び品質には万全を期しておりますが、万が一商品に不備があった場合は、取付けの作業をしないて下さい。
4.不具合が発生した場合、使用を中止してください。
5.この装置の設計目的はウインカーやブレーキランプの視認性の増強ですが、地域によって、道路法に違反の点滅モードもあります。ご注意ください。
6.取り付けのために、改造は必要の可能性はあります。
7.以上の説明が守られていない場合、商品への保証はいたしませんのでご注意ください。
8.OEM TSM/TSSMモジュールを使っている近代のハーレーバイクには不適用です。
9.純正ウインカーを取り外して、本製品を単独で使用した場合、車検への適合は保証できませんのでご了承ください。

KiWAV Oi & Lucifer black LED motorcycle mirrors for sportsbike

KiWAV Oi & new generation light Oi flash controller

KiWAV Oi & Oi & Lucifer black LED motorcycle mirrors for sportsbike

Sealed LED module with IP67 dust & waterproof compliant.

→ What does IP67 waterproof rating mean?

IP67: Ingress protection, Solid particle protection, Liquid ingress protection

IP6x is the highest dust resistance rating, so this product is fully protected against dust.
IPx7, the second-highest water resistance rating, means this product can withstand immersion in water up to one meter (3.3 feet) for 30 minutes, tested in laboratory conditions.

Code	Effective against	Description
6	Dust tight	No ingress of dust; complete protection against contact (dust tight). A vacuum must be applied. Test duration of up to 8 hours based on air flow.

Code	Protection against	Test duration	Description
7	Immersion, up to 1 m depth	30 mins	Protected from immersion in water with a depth of up to 1 meter (or 3.3 feet) for up to 30 mins

Lucifer LED Motorcycle mirror turn signal, driving light, in the daylight, at night, in total darkness

Feature
1. Oi flash controller with Lucifer LED mirrors completes your custom motorcycle project to a full A+ grade..
2. Two-tone color LED lights, various combinations of driving and indicator lights set up.
3. Waterproof and dustproof LED modules.
4. Stylish designs for your custom applications.
5. Wider vision with convex lens and E-mark approved.
6. *Sealed LED module with IP67 dust & waterproof Compliant.

Oi Flash Controller SPEC
♦ 16 different modes that can be applied to your stop light, turn signal light, hazard light, and decoration light.
♦ Operate in the voltage range from 6.5V to 16V. (Suitable for 12V vehicle power system)
♦ Ambient temperature must not below -20° (-4°F) and not exceed +85° (185°F).
♦ Works both for halogen & LED bulbs.
♦ Super-duper easy set up for LED lights. NO LOAD RESISTOR IS NEEDED.
♦ Maximum current rating up to 8A. (Suitable for up to 4 light bulbs with 21W)
Material
Mirror Housing: ABS plastic
Mirror Stem: Aluminum
Shape
Diamond / Other
Glass
Chrome Convex Lens
Mirror Wire Length
620mm / 24inch

Color
Mirror plate: matt black LED: White: 2 PCS (12V / 0.9W), Amber: 7 PCS (12V / 0.9W)
Adjustment
High adjustable (three adjusting joints)
Weight
n.w.: 820 g./ 1.8 lbs. (pair),
g.w.: 1220 g/ 2.68 lbs. (total package, packing inclusive)
Package
a pair ( Left hand / Right hand ),
Oi flash controller x 2 pcs,
adapter with toothed adjustment joint x 2 PCS,
rubber mounting gasket x 2 PCS,
M6 bolt 25 mm long x 4 PCS,
M6 bolt 40 mm long x 4 PCS,
M6 nut x 4 PCS,
big washer x 4 PCS, small washer x 4 PCS

Fitment
Suitable for hole spacings C2C on the fairing from 26 mm to 55 mm.
See the Fitment List
Oi Flash Controller is designed to replace a 3-pin flasher relay ONLY (not for a 4 or 5 pin relay, it will destroy the device).

Aprilia

Ducati

Suzuki

Kawasaki

MV Agusta

Honda

YAMAHA
Installation
1. Please refer to your service manual to remove the original mirror.
2. Temporarily fix the mirror to the bolt fixing position of the vehicle, using the base rubber, bolts (those with matching length or genuine one), washers and nuts. (See the figure below)
3. Once temporarily fixed to the left and right, please adjust the whole position using hexagon wrench at the two bolts at the bottom of the mirror.
4. Tightening each part after the position is finally fixed.

Connect to the Turn Signal

♦ There is no need to replace the relay when using this product with exisiting blinkers.
♦ Relay is needed when using this product as the only turn signal.
♦ Minor modification might be required depending on motorcycles.

Check the wiring of the vehicle on the manufacturer service manual, refer to the wiring table below, and connect the turn signal wiring with the attached electro tap.
Also, please wire the position line (white) of this product to the accessory power supply of each vehicle.

A table of this product and main manufacturer blinker wiring colors:

	Running Light (-)	Right Turn Signal (+)	Left Turn Signal (+)
Lucifer	black	yellow	yellow
Honda	green	light blue	orange
Yamaha	black	deep green	brown
Suzuki	black / white	light green	black
Kawasaki	black / yellow	grey	green

Each manufacturer wiring color in the table is for reference only, it depends on the vehicle year and specifications, please be sure to confirm with the service manual issued by the manufacturer and connect it.

These are not plug & play parts, motorcycle electrical knowledge is required.
For removal / installation of genuine parts and tightening of bolts / nuts, please be sure to perform based on the manufacturer's issued service manual.
We are making every effort to manufacture and making sure its quality, but please do not install if there is any incompleteness in the item if any.
Please stop using it immediately if any faults happen.
Although this device has been designed to significantly increase your lighting visibility, flash/strobe patterns may not be street legal in your area.
*Protected from dust / Protected against the effects of immersion in water to depth between 15cm and 1 meter.
Minor modification might be required.
Warranty is voided if any of the above are not followed.
Newer Harley-Davidsons run the "indicator flash rate" through the OEM TSM/TSSM modules. You can not use Oi flash controller if the OEM TSM/TSSM modules include the circuit of your motorcycle.