二色LED付きカウルミラー ルシファー カーボンの模様 流れるタイプ フェアリング取付 汎用

0 Rating
$189.00
$170.10
You save:
$18.90
在庫あり
商品番号: 100109919000008
適用範囲 単位
Visualize it right away
Printable 1:1 actual size. Print and compare before purchase.
特色:
1.二色の高輝度LEDライトはドライヴィングやウインカーとして使えます。
2.シーケンシャルタイプのLEDライト――内側から外側へ順に点灯する。
3.IP67認証、防塵と防水の密封LEDモジュール 。
4.スタイリッシュ外見、カスタムバイクに似合います。
5.ヨーロッパのE-mark認証取っておりのミラーとLEDライト。
6.簡単で取り付けができます。

 
取付可能車種:
https://stores.ebay.com/kiwav/pages/kiwav-sportsbike-mirrors-fitment
Honda CB1300SB、CBR250RR、CBR125R、Yamaha YZF-R25、Kawasaki Ninja、Aprilia RSV4 Ducati 1198 、959 1299 Panigale、 MV Agusta F4 1000 等
(ご購入前に取付けの説明をご確認ください)

 
取付け説明:カウルミラー仕様になっている車両専用
取付け条件:
1.純正ミラーが6ミリボルト2本で固定されているバイク。
2.取付ボルトの固定ピッチ範囲が20mm-56mmのバイク。
3.取付け面が平面のバイク。

 
ハウジングの材料:ABSプラスチック
柄の材料:アルミニュム
ミラーの色:カーボン仕様
LEDの色――白:二個 (12V / 0.9W);琥珀色:七個 (12V / 0.9W)
ガラス:クロム凸レンズ
電線長さ:620mm /24inch
調整範囲:調整できる
重量:n.w.: 700g./1.54 lbs(一対), g.w.: 1100g/2.42 lbs(全体な重量、包装も含まれ)
パッケージ:
一対(右側と左側)、
調整用のジョイント付きアダプターx2、
ゴムの取付ガスケットx2、
25mm長さのM6ボルトx4、
40mm長さのM6ボルトx4、
M6ナットx4、
大きい座金x4、
小さい座金x4


 

註:
1.汎用製品なので、部分改造や、加工は必要の可能性があります。
2.純正ウインカーを取り外して、本製品を単独で使用した場合、車検への適合は保証できませんのでご了承ください。

Sealed LED module with IP67 dust & waterproof compliant.

→ What does IP67 waterproof rating mean?

IP67: Ingress protection, Solid particle protection, Liquid ingress protection

IP6x is the highest dust resistance rating, so this product is fully protected against dust.
IPx7, the second-highest water resistance rating, means this product can withstand immersion in water up to one meter (3.3 feet) for 30 minutes, tested in laboratory conditions.

Code Effective against Description
6 Dust tight No ingress of dust; complete protection against contact (dust tight). A vacuum must be applied. Test duration of up to 8 hours based on air flow.

Code Protection against Test duration Description
7 Immersion, up to 1 m depth 30 mins Protected from immersion in water with a depth of up to 1 meter (or 3.3 feet) for up to 30 mins
Lucifer LED Motorcycle mirror turn signal, driving light, in the daylight, at night, in total darkness
  • Feature
    1. Two-tone color LED lights. White light as the running light, yellow light as the turn signal.
    2. Turn signal light up in sequence, from the inside outwards.
    3. Sealed LED module with IP67 dust & waterproof compliant.
    4. Stylish designs for your custom applications.
    5. Wider vision with convex lens and E-mark approved.
    6. Easy installation.
  • Material
    Mirror Housing: ABS plastic
    Mirror Stem: Aluminum
  • Shape
    Diamond / Other
  • Glass
    Chrome Convex Lens
  • Weight
    n.w.: 700 g./ 1.54 lbs. (pair),
    g.w.: 1100 g/ 2.42 lbs. (total package, packing inclusive)
  • Color
    Mirror plate: carbon fiber pattern
    LED: White: 2 PCS (12V / 0.9W), Amber: 7 PCS (12V / 0.9W)
  • Adjustment
    High adjustable (three adjusting joints)
  • Wire Length
    620mm / 24inch
  • Package
    a pair ( Left hand / Right hand ),
    adapter with toothed adjustment joint x 2 PCS,
    rubber mounting gasket x 2 PCS,
    M6 bolt 25 mm long x 4 PCS,
    M6 bolt 40 mm long x 4 PCS,
    M6 nut x 4 PCS,
    big washer x 4 PCS, small washer x 4 PCS
  • Fitment
    Suitable for hole spacings C2C on the fairing from 26 mm to 55 mm.
    See the Fitment List
  • Installation

    1. Please refer to your service manual to remove the original mirror.
    2. Temporarily fix the mirror to the bolt fixing position of the vehicle, using the base rubber, bolts (those with matching length or genuine one), washers and nuts. (See the figure below)
    3. Once temporarily fixed to the left and right, please adjust the whole position using hexagon wrench at the two bolts at the bottom of the mirror.
    4. Tightening each part after the position is finaly fixed.

    Installation Guide of KiWAV Lucifer LED mirrors for sportsbike
  • Connect to the Turn Signal

    ♦ There is no need to replace the relay when using this product with exisiting blinkers.
    ♦ Relay is needed when using this product as the only turn signal.
    ♦ Minor modification might be required depending on motorcycles.

    Check the wiring of the vehicle on the manufacturer service manual, refer to the wiring table below, and connect the turn signal wiring with the attached electro tap.
    Also, please wire the position line (white) of this product to the accessory power supply of each vehicle.

    A table of this product and main manufacturer blinker wiring colors:
    Running Light (-) Right Turn Signal (+) Left Turn Signal (+)
    Lucifer black yellow yellow
    Honda green light blue orange
    Yamaha black deep green brown
    Suzuki black / white light green black
    Kawasaki black / yellow grey green

    Each manufacturer wiring color in the table is for reference only, it depends on the vehicle year and specifications, please be sure to confirm with the service manual issued by the manufacturer and connect it.

    In order to use this product safely please understand and work on the followings:
  1. 1. This is only suitable for skilled users, others please find the nearest dealers.
  2. 2. For removal / installation of genuine parts and tightening of bolts / nuts, please be sure to perform based on the manufacturer's issued service manual.
  3. 3. Please stop using it immediately if any faults happen.
  4. 4. We are making every effort to manufacture and making sure its quality, but please do not install if there is any incompleteness in the item if any.
  5. 5. Warranty is voided if any of the above are not followed.

*Please allow measuring deviation due to manual measurement.

Measurement of KiWAV Lucifer LED motorcycle mirrors for sportsbike

商品レビューはまだありません

レビューを書くためにはログインしてください。 ログイン