二色LED付きバイクミラー ルシファーII 黒 Oiフラッシュコントロール付き M10正ネジ バイクに汎用
取付可能車種: 10mm1.25正ネジ:バイクに汎用(ホンダ、カワサキ、スズキ、BMW、ビクトリー、トライアンフ)
ハウジングの材料:ABSプラスチック 柄の材料:アルミニュム 鏡板の色:黒 LED: 白:二個 (12V / 0.9W);琥珀色:七個 (12V / 0.9W) ガラス:クロム凸面鏡 ミラーの電線長さ:620mm /24inch Oiフラッシュコントロールの電線長さ:155mm/ 6.1 inch 調整範囲:かなり調整できます 重量:n.w.: 840 g./ 1.85 lbs. (一対)、 g.w.: 1125 g/2.46 lbs.(全体な重量、包装を含まれ) パッケージ: 一対(右側と左側) Oiライトフラッシュコントロール 2個
註: 1.プラグアンドプレイのパーツではありません。ある程度の車両電子知識は必要です。 2.純正部品の取外し/取付け、ボルト/ナットの締め付けについては各メーカーのサービルマニュアルに基づいて、確実に作業をしてください。 3.製造及び品質には万全を期しておりますが、万が一商品に不備があった場合は、取付けの作業をしないて下さい。 4.不具合が発生した場合、使用を中止してください。 5.この装置の設計目的はウインカーやブレーキランプの視認性の増強ですが、地域によって、道路法に違反の点滅モードもあります。ご注意ください。 6.取り付けのために、改造は必要の可能性はあります。 7.以上の説明が守られていない場合、商品への保証はいたしませんのでご注意ください。 8.OEM TSM/TSSMモジュールを使っている近代のハーレーバイクには不適用です。
9.純正ウインカーを取り外して、本製品を単独で使用した場合、車検への適合は保証できませんのでご了承ください。
Sealed LED module with IP67 dust & waterproof compliant.
→ What does IP67 waterproof rating mean?
IP6x is the highest dust resistance rating, so this product is fully protected against dust.
IPx7, the second-highest water resistance rating, means this product can withstand immersion in water up to one meter (3.3 feet) for 30 minutes, tested in laboratory conditions.
Code | Effective against | Description |
---|---|---|
6 | Dust tight | No ingress of dust; complete protection against contact (dust tight). A vacuum must be applied. Test duration of up to 8 hours based on air flow. |
Code | Protection against | Test duration | Description |
---|---|---|---|
7 | Immersion, up to 1 m depth | 30 mins | Protected from immersion in water with a depth of up to 1 meter (or 3.3 feet) for up to 30 mins |
- Features
- Oi flash controller with Lucifer LED mirrors completes your custom motorcycle project to a full A+ grade..
- Two-tone color LED lights, various combinations of driving and indicator lights set up.
- Waterproof and dustproof LED modules.
- Stylish designs for your custom applications.
- Wider vision with convex lens and E-mark approved.
- *Sealed LED module with IP67 dust & waterproof Compliant.
- Oi Flash Controller SPEC
♦ 16 different modes that can be applied to your stop light, turn signal light, hazard light, and decoration light.
♦ Operate in the voltage range from 6.5V to 16V. (Suitable for 12V vehicle power system)
♦ Ambient temperature must not below -20° (-4°F) and not exceed +85° (185°F).
♦ Works both for halogen & LED bulbs.
♦ Super-duper easy set up for LED lights. NO LOAD RESISTOR IS NEEDED.
♦ Maximum current rating up to 8A. (Suitable for up to 4 light bulbs with 21W) - Material
Mirror Housing: ABS plastic
Mirror Stem: Steel
- Shape
Diamond / Other - Glass
Chrome convex lens - Mirror Wire Length
620mm / 24inch
- Color
Mirror plate: Matte black
LED: White: 2 PCS (12V / 0.9W), Amber: 7 PCS (12V / 0.9W) - Adjustment
Fairly adjustable - Weight
n.w.: 840 g./ 1.85 lbs. (pair),
g.w.: 1125 g/ 2.46 lbs. (total package, packing inclusive) - Package
A pair of mirrors (Left hand / Right hand),
Oi flash controller x 2 PCS
- Compatibility
10MM(1.25 pitch): Universal fit for most 10mm standard thread (clockwise) motorcyclesOi Flash Controller is designed to replace a 3-pin flasher relay ONLY (not for a 4 or 5 pin relay, it will destroy the device).
Connect to the Turn Signal
♦ There is no need to replace the relay when using this product with exisiting blinkers.
♦ Relay is needed when using this product as the only turn signal.
♦ Minor modification might be required depending on motorcycles.
Check the wiring of the vehicle on the manufacturer service manual, refer to the wiring table below, and connect the turn signal wiring with the attached electro tap.
Also, please wire the position line (white) of this product to the accessory power supply of each vehicle.A table of this product and main manufacturer blinker wiring colors:
Running Light (-) Right Turn Signal (+) Left Turn Signal (+) Lucifer black yellow yellow Honda green light blue orange Yamaha black deep green brown Suzuki black / white light green black Kawasaki black / yellow grey green Each manufacturer wiring color in the table is for reference only, it depends on the vehicle year and specifications, please be sure to confirm with the service manual issued by the manufacturer and connect it.
- In order to use this product safely please understand and work on the followings:
- These are not plug & play parts, motorcycle electrical knowledge is required.
- For removal / installation of genuine parts and tightening of bolts / nuts, please be sure to perform based on the manufacturer's issued service manual.
- We are making every effort to manufacture and making sure its quality, but please do not install if there is any incompleteness in the item if any.
- Please stop using it immediately if any faults happen.
- Although this device has been designed to significantly increase your lighting visibility, flash/strobe patterns may not be street legal in your area.
- *Protected from dust / Protected against the effects of immersion in water to depth between 15cm and 1 meter.
- Minor modification might be required.
- Warranty is voided if any of the above are not followed.
- Newer Harley-Davidsons run the "indicator flash rate" through the OEM TSM/TSSM modules. You can not use Oi flash controller if the OEM TSM/TSSM modules include the circuit of your motorcycle.
*Please allow measuring deviation due to manual measurement.
商品レビューはまだありません
レビューを書くためにはログインしてください。 ログイン