- Features
- Oi flash controller with Lucifer LED mirrors completes your custom motorcycle project to a full A+ grade..
- Two-tone color LED lights, various combinations of driving and indicator lights set up.
- Waterproof and dustproof LED modules.
- Stylish designs for your custom applications.
- Wider vision with convex lens and E-mark approved.
- *Sealed LED module with IP67 dust & waterproof Compliant.
- Oi Flash Controller SPEC
♦ 16 different modes that can be applied to your stop light, turn signal light, hazard light, and decoration light.
♦ Operate in the voltage range from 6.5V to 16V. (Suitable for 12V vehicle power system)
♦ Ambient temperature must not below -20° (-4°F) and not exceed +85° (185°F).
♦ Works both for halogen & LED bulbs.
♦ Super-duper easy set up for LED lights. NO LOAD RESISTOR IS NEEDED.
♦ Maximum current rating up to 8A. (Suitable for up to 4 light bulbs with 21W)
- Material
Mirror Housing: ABS plastic
Mirror Stem: Steel
- Shape
Diamond - Glass
Chrome convex lens - Mirror Wire Length
620mm / 24inch
- Color
Mirror plate: Matte black LED: White: 2 PCS (12V / 0.9W), Amber: 7 PCS (12V / 0.9W) - Adjustment
Fairly adjustable - Weight
n.w.: 900 g./ 1.98 lbs. (pair),
g.w.: 1180 g./ 2.6 lbs. (total package, packing inclusive)
- Package
A pair of mirrors (Left hand / Right hand),
Oi flash controller x 2 PCS,
10mm to 5/16"-24 adapter x 2 PCS
- Compatibility
5/16": Compatible for most Harley Davidson, except '21 later Revolution® Max engine-equipped models, Nightster, Pan America, etc... and XG street models
Compatible for BMW R18 series models.
Oi Flash Controller is designed to replace a 3-pin flasher relay ONLY (not for a 4 or 5 pin relay, it will destroy the device).
Connect to the Turn Signal
♦ There is no need to replace the relay when using this product with exisiting blinkers.
♦ Relay is needed when using this product as the only turn signal.
♦ Minor modification might be required depending on motorcycles.
Check the wiring of the vehicle on the manufacturer service manual, and connect the turn signal wiring with the attached electro tap.
Also, please wire the position line (white) of this product to the accessory power supply of each vehicle.
In order to use this product safely please understand and work on the followings: - These are not plug & play parts, motorcycle electrical knowledge is required.
- For removal / installation of genuine parts and tightening of bolts / nuts, please be sure to perform based on the manufacturer's issued service manual.
- We are making every effort to manufacture and making sure its quality, but please do not install if there is any incompleteness in the item if any.
- Please stop using it immediately if any faults happen.
- Although this device has been designed to significantly increase your lighting visibility, flash/strobe patterns may not be street legal in your area.
- *Protected from dust / Protected against the effects of immersion in water to depth between 15cm and 1 meter.
- Minor modification might be required.
- Warranty is voided if any of the above are not followed.
- Newer Harley-Davidsons run the "indicator flash rate" through the OEM TSM/TSSM modules. You can not use Oi flash controller if the OEM TSM/TSSM modules include the circuit of your motorcycle.
KiWAV, kiwavMirror, kiwavmotor, motorcycle, Oi flash controller, Lucifer, LuciferLED, Lucifer-FI LED, LuciferLED-FI LuciferHarley LuciferHarley-FI LED, naked, mat 5/16inch