バイク用LEDテールランプ 3インチ 丸い 汎用 黒のブラケットとOiフラッシュコントロール付き
レンズの材料:アクリル リフレクターとフレームの材料:ABS ブラケットの材料:鋼 ストップライト色:レッド ウインカー色:アオレンジ ブラケット色:ブラック タイプ:テールライト、ウインカー(オプション、ライト二つが必要) 光源: テールライト:レッドのLED12個 12V 0.1W/ 12V 1.7W ウインカー:オレンジのLED6個 12V 2.0W テールライトの電線長さ:145mm/ 5.7 inch Oiフラッシュコントロールの電線長さ:155mm/ 6.1 inch 正味重量:309g パッケージ:LEDテールライト 1個、ライトブラケット1個、六角ナット3個、Oiライトフラッシュコントロール 一個 認証:EMI3級、IP66の防塵と防水認証
*防塵/防水: 強い水に噴射されたの影響を防ぐ。
註: 1.プラグアンドプレイのパーツではありません。ある程度の車両電子知識は必要です。 2.この装置の設計目的はウインカーやブレーキランプの視認性の増強ですが、地域によって、道路法に違反の点滅モードもあります。ご注意ください。 3.取り付けのために、改造は必要の可能性はあります。 4.ブラケットの塗装仕上げは耐熱不可で、ただ鋼の保護と防塵です。リヤフェンダに適するための調整後は、つや出し、クロム処理或は吹付塗覆はおすすめです。 5.OEM TSM/TSSMモジュールを使っている近代のハーレーバイクには不適用です。
- Feature
- Get more attention and visibility from the vehicle behind you in traffic.
- 16 flashing modes that no one else has.
- Much brighter and cooler than a normal taillight.
- 12 LEDs for stop/ tail lamp.
- IP66 dust & waterproof compliant*.
- Indicator function. (Need to install two lamps)
- Pre-cut plate for round LED tail light.
- Chromed finish for rust-resistance.
- Mounting bracket and nuts included.
- Oi Flash Controller SPEC
♦ 16 different modes that can be applied to your stop light, turn signal light, hazard light, and decoration light.
♦ Operate in the voltage range from 6.5V to 16V. (Suitable for 12V vehicle power system)
♦ Ambient temperature must not below -20° (-4°F) and not exceed +85° (185°F).
♦ Works both for halogen & LED bulbs.
♦ Super-duper easy set up for LED lights. NO LOAD RESISTOR IS NEEDED.
♦ Maximum current rating up to 8A. (Suitable for up to 4 light bulbs with 21W)Oi Flash Controller is designed to replace a 3-pin flasher relay ONLY (not for a 4 or 5 pin relay, it will destroy the device).
- Material
Lens: Acrylic
Reflector, Frame: ABS
Bracket: Steel - Net Weight
309g - Package
LED tail light x 1, light mounting bracket x 1, Hex nut x 2, Oi flash controller x 1
- Color
Tail/ stop: red LED
Indicator: amber LED
Bracket: chrome - Shape
Round - Light Source
Tail/ stop: 12pcs red LED, 12V 0.1W/ 12V 1.7W
Indicator: 6pcs amber LED, 12V 2.0W
The turn signal lights are 2.0W instead of 1.2W in mass production.
(Note: The imprint on unit wasn't revised specifically.) - Wire Length
Tail light: 145mm/ 5.7 inch
Oi flash controller: 155mm/ 6.1 inch - Type
Tail lamp, (optional)turn signal - Certification
EMI class 3 and IP66 dust & waterproof Compliant*
ECE, SAE approved.
2. Modification maybe needed during installation.
3. The finish of bracket is not intended to withstand heat and binding. It is merely plated to protect the steel for rust-resistance. After tweaking the bracket to fit your fender, we suggest polishing and chroming, or at least a good coat of spray paint.
4. Newer Harley-Davidsons run the "indicator flash rate" through the OEM TSM/TSSM modules. You can not use Oi flash controller if the OEM TSM/TSSM modules include the circuit of your motorcycle.
*Please allow measuring deviation due to manual measurement.
商品レビューはまだありません
レビューを書くためにはログインしてください。 ログイン