LED neat stem mirrors Lucifer with sequential effect black compatible with Harley Davidson

0 Rating

$179.00

In Stock

SKU: 100110319005503
EAN: 0680577051799

Magazi matt black with two-tone LED neat stem rear view motorcycle mirrors Lucifer is E-mark approved. Sealed LED module with IP67 dust & waterproof Compliant. The mirror housing is made out of ABS plastic and the stem is made of aluminum 1 joint(s) make it fairly adjustable, diamond shape chrome convex lens gives a wide and clear view.

KiWAV motorcycle Two-tone LED with sequential effect mirrors Lucifer black for Harley Davidson

Sealed LED module with IP67 dust & waterproof compliant.

→ What does IP67 waterproof rating mean?

IP67: Ingress protection, Solid particle protection, Liquid ingress protection

IP6x is the highest dust resistance rating, so this product is fully protected against dust.
IPx7, the second-highest water resistance rating, means this product can withstand immersion in water up to one meter (3.3 feet) for 30 minutes, tested in laboratory conditions.

Code	Effective against	Description
6	Dust tight	No ingress of dust; complete protection against contact (dust tight). A vacuum must be applied. Test duration of up to 8 hours based on air flow.

Code	Protection against	Test duration	Description
7	Immersion, up to 1 m depth	30 mins	Protected from immersion in water with a depth of up to 1 meter (or 3.3 feet) for up to 30 mins

Lucifer LED Motorcycle mirror turn signal, driving light, in the daylight, at night, in total darkness

Features
1. Two-tone color LED lights, various combinations of driving and indicator lights set up.
2. Turn signal light up in sequence, from the inside outwards.
3. Sealed LED module with IP67 dust & waterproof compliant.
4. Stylish designs for your custom applications.
5. Wider vision with convex lens and E-mark approved.
6. Easy installation.

Material
Mirror Housing: ABS plastic
Mirror Stem: Steel
Shape
Diamond
Glass
Chrome convex lens
Weight
n.w.: 780 g./ 1.76 lbs. (pair),
g.w.: 1060 g./ 2.33 lbs. (total package, packing inclusive)

Color
Mirror plate: Matte black
LED: White: 2 PCS (12V / 0.9W), Amber: 7 PCS (12V / 0.9W)
Adjustment
Fairly adjustable
Wire Length
620mm / 24inch
Package
A pair of mirrors (Left hand / Right hand),
10mmto 5/16"-24 adapter x 2 PCS

Compatibility
5/16": Compatible for most Harley Davidson, except '21 later Revolution® Max engine-equipped models, Nightster, Pan America, etc... and XG street models
Compatible for BMW R18 series models.

Harley Davidson

BMW
Connect to the Turn Signal

♦ There is no need to replace the relay when using this product with exisiting blinkers.
♦ Relay is needed when using this product as the only turn signal.
♦ Minor modification might be required depending on motorcycles.

Check the wiring of the vehicle on the manufacturer service manual, and connect the turn signal wiring with the attached electro tap.
Also, please wire the position line (white) of this product to the accessory power supply of each vehicle.

This is only suitable for skilled users, others please find the nearest dealers.
For removal / installation of genuine parts and tightening of bolts / nuts, please be sure to perform based on the manufacturer's issued service manual.
Please stop using it immediately if any faults happen.
We are making every effort to manufacture and making sure its quality, but please do not install if there is any incompleteness in the item if any.
Warranty is voided if any of the above are not followed.

KiWAV, kiwavMirror, kiwavmotor, motorcycle, Lucifer, LuciferLED, Lucifer-FI, LuciferLED-FI, LuciferHarley LuciferHarley-FI LED, naked, black, mat 5/16inch, sequential LuciferFISQN

*Please allow measuring deviation due to manual measurement.