Blade black bar end mirrors a pair for E-bikes, bicycles
$119.00
In Stock
SKU: 100117119317803
How to pick the correct bar end mirrors mounting hardware.
Please identify and choose the suitable mounting hardware for your bike. Contact us if you are not certain.
The thinnest mirrors for bicycle, e-bike, electric bike ! The Minimal mirrors series - unbelievably thin aluminum mirror plate. Every part of the plate can't be thinner and still has enough space to put a convex glass on!
It will ONLY work on 7/8" hollow ended handlebars with internal diameters from 14mm to 20mm.
It will ONLY work on 7/8" hollow ended handlebars with internal diameters from 14mm to 20mm.
How to install this bar end mirrors on your motorcycle
- Features
- The thinnest motorcycle mirrors.
- Unbelievably thin aluminum mirror plate. Every part of the plate can't be thinner and still has enough space to put a convex glass on!
- Unique patented adjust-and-stop Teflon(PTFE) bushing joint. On the road, you can easily adjust the mirror plate with your bare hand and don't have to worry about it goes messing around.
- Minimal design.
- The special design of the ball knuckle - The most impossible angle adjusted as your desire. It's a good solution to fold-in mirrors when you are splitting traffic or parking the motorcycle in a narrow space.
- Glass mirror - better scratch resistance than non glass one.
- It fits perfectly with naked motorcycles. The eye-catching design and high-quality aluminum give your bike an individual character.
- It can be mounted in 2 ways, standard upright or flip it down.
- Material
Mirror Housing: Aluminum
Mirror Stem: Aluminum - Color
Black - Adjustment
Highly adjustable
- Glass
Chrome convex lens - Weight
n.w.: 432 g./ 0.95 lbs. (pair),
g.w.: 567 g./ 1.25 lbs. (total package, packing inclusive) - Package
A pair of mirrors (left hand / right hand),
14, 17mm expansion components-hollow side x 2,
14, 17mm expansion components-threaded side x 2,
M6 bolt x 2
- Compatibility
It ONLY works on outer diameter 7/8" hollow-ended handlebars with internal diameter (ID):
The 14mm expansion components set is for ID of 14.5mm to 15.7mm,
and the 17mm expansion components set is for ID of 17.5mm to 20.4mm.
If the ID of your bar does not fall in the range above, please contact us before purchase.
*For 1" and 1-1/4" hollow ended handlebars or threaded inside the bar end, please find the suitable set in our store, or leave the model and year of the motorcycle as notes before finishing your order.
1. Can not be installed on vehicles having electronic throttle control (ETC).
2. Some bikes with solid bar need to drill and tap. Modification might be needed.
3. For 1" and 1-1/4" hollow ended handlebars or threaded inside the bar end, please find the suitable set in our store, or leave the model and year of the motorcycle as notes before finishing your order.
4. Because of the small dimensions of the mirror glass, this product must only be fitted for racing or show purposes.
5. Might need to apply some washers as spacer to avoid contact with grips. (spacers are not included.)
2. Some bikes with solid bar need to drill and tap. Modification might be needed.
3. For 1" and 1-1/4" hollow ended handlebars or threaded inside the bar end, please find the suitable set in our store, or leave the model and year of the motorcycle as notes before finishing your order.
4. Because of the small dimensions of the mirror glass, this product must only be fitted for racing or show purposes.
5. Might need to apply some washers as spacer to avoid contact with grips. (spacers are not included.)
*Please allow measuring deviation due to manual measurement.
There are yet no reviews for this product.
Please log in to write a review. Log in
